Tested printers
Tested printers
Section titled “Tested printers”The printer connection reads filament usage via Moonraker. Any Klipper printer running Moonraker should work, but firmware, mods and slicers differ from machine to machine. This list shows what has actually been checked.
| Printer | System | Checked | As of | Result |
|---|---|---|---|---|
| Sovol SV08 | Stock Klipper | Print list and usage, deducting from the spool in the app | v0.14.0 | ✅ Confirmed in daily use |
| Anycubic Kobra S1 with ACE Pro / ACE Pro 2 | Rinkhals | Print list and usage, deducting from the spool, matching file names to the model; cancelled prints are deducted with the actual amount; two printers side by side | October 2026 | ✅ Confirmed in long-term use (2 printers) |
| Qidi Smart 3 | Stock Klipper | Print list and usage readable; the printer’s clock was wrong, the app compensates for that since v0.15.0 | v0.15.0 | 🟡 From v0.15.0 |
| Creality K2 Plus (with CFS) | Creality Klipper 1.1.6.1, rooted | Print list and usage readable; no material or weight from the slicer, so the spool is chosen by hand | v0.15.0 | ☑️ Test report checked |
| Qidi Q1 Pro | Stock Klipper (Moonraker 0.7.1) | Print list and usage readable; material and weight come from the slicer (QIDISlicer) | v0.15.0 | ☑️ Test report checked |
| Anycubic Kobra 3 V2 | Klipper with Rinkhals | Print list and usage readable; material (PETG) and weight come from the slicer data; the printer reports an ACE module, only one print with a single colour entry was checked | October 2026 | ☑️ Test report checked |
What the results mean
Section titled “What the results mean”- Confirmed in daily use: tried with the app on a real printer.
- Confirmed in long-term use: used by users in everyday printing over a longer period and reported back.
- Test report checked: the data from the anonymous test form fits, a hands-on test is still missing.
- From v0.15.0: only works from this version on, before that there was a known problem.
What the tests have already changed in the app
Section titled “What the tests have already changed in the app”- File names from the Anycubic slicer such as
slide(01),Model_plate_1(1)or with a date in front (0926-1506-…) are matched to the catalog model. - Prints whose file the printer deleted after printing (current Rinkhals) are still offered.
- If the printer’s clock is wrong, the app compensates for the offset and shows both times.
- If the slicer provides no material and no weight, the spool is chosen by hand.
Your printer is missing?
Section titled “Your printer is missing?”Your test adds it. Already listed? Your test still helps, because firmware, mods and plugins differ from printer to printer. The test page explains step by step what you need. Taking part is anonymous.